Results 1 to 3 of 3

Thread: Phoenix Service Software 2011.08.005.45529 Cracked [ Update 06.04.2011 ]

  1. #1
    Crazy Poster vishal_zala's Avatar
    Phone model
    Join Date
    Mar 2007

    Default Phoenix Service Software 2011.08.005.45529 Cracked [ Update 06.04.2011 ]

    Phoenix Service Software 2011.08.005.45529 Cracked

    [CODE]Main component versions in the release:
    • DK2 Driver Version
    • Nokia Connectivity Cable USB Driver Version
    • Flash Update Package 2011.010.000
    • FLS-x Drivers Version 2.09.28
    • FUSE Connection Manager v 2011.6.0.62


    New Products added
    • RM-670

    New features
    • New version of FUSE connection Manager
    • New version of Flash Update Package
    • New version of Autotuning components
    • New version of Product API
    • New version of Tucson components. NOTE: Tucson operations combined with “flash” – option are now
    handled in the same way as “refurbishment”, which requires Mass Memory Content File to be available.
    • Tucson components now support RM-704 and product using same engine

    Error Corrections & changes
    • Correction to RX-51 phone SW related error which caused security self test fail after combo memory
    has been replaced and product is autotuned successfully
    • Correction to DCT-4 Band Information writing
    • Correction to use with USER rights. Connections and other configurations made with ADMIn rights can
    now be used with USER rights
    • Correction to RM-555 eMMC file programming during refurbishment flashing ( Genius Case #177026)
    • Correction to hanging problem in Envira – Tool ( ZIP – file generator)
    • Envira – Tool can now collect Phoenix crash file ( Minidump.dmp) into the same ZIP – file with other
    log files
    • FUSE – Connection Manager now starts in NO CONNECTION – state each time Phoenix is started. User
    must always select the desired connection after starting Phoenix. This helps to avoid problems caused
    by changes in tool setup which have been made while Phoenix was shut down.
    • Change to Tucson menu items and their use with “flash” option: Flashing is now handled in the same
    manner as “refurbishment” – option in Firmware Update – menu. This means that the use of Mass
    Memory File is mandatory and it needs to be available in the product specific directory. if file is not
    available, process will fail an it will be aborted.
    • New common data package location in use.Please see document SR1315 in KICS Information Center
    for further information.
    • All Nokia Service Software Applications will use following location for product specific data:
    - Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
    - Windows 7: C:\Program Data\Nokia\Packages
    • During installation, Data Packages should be installed in these directories, if they install to any other
    location by default. Target folder for local data packages can be changed in the installation wizard
    • This version contains the latest Tucson components. Therefore it is not necessary to use Tucson
    Add-On Installation Packages
    • Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC)
    should be turned off from Windows Control Panel settings.
    • For more information concerning new options in “Firmware Update” – menu and their use, Please see
    document SR1313 in KICS Information Center.
    • Product Code changes for USB Only – phones (RX-51, RM-596 etc) work only when used with FPS-21
    Flash Prommer and USB connection from prommer rear panel to phone. Please select USB as Product
    Active Media
    • Do not use Flash option simultaneously with product code change for USB Onbly phones, flash phone
    separately with Firmware Update
    • It is recommended to use FPS-21 flash prommer with TCPIP connection when refurbishing USB Only -
    phones (RM-596 etc) due to mandatory optional MMC file size.
    • Connection media to FLS-5 must be configured to be “USB_FBUS”. After FLS-4 support has been
    removed FBUS connection does not work anymore with FLS-5

    • Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
    Package 2 concept.
    • Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can
    be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.
    • If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This
    is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current
    information during installation. If you experience problems when updating FPS-x prommers, please
    check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is
    “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file
    failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct
    directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
    • Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be
    • FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version
    11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered
    • Please refer to product specific documents and instructions concerning the limitations of the RX-51
    • RX-51 flashing does not work when CU-4 is used
    • RX-51 Product Code changes work only without FLASH option, please flash phone separately
    • When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older
    Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the
    first time. Please wait patiently; Phoenix will start after configuration is finished.
    • When using Data Package download functions with online connection, download times may
    occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online
    servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
    • After you close Phoenix, it may not restart. To rectify this:
    - Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or
    optionally restart your PC
    • It is not possible to program Mass Media Content file to some devices over direct USB cable
    connection, due to the large size of the file. For these models a feature called “Media Check” has been
    implemented. When this type of product is connected to service software / PC via direct USB cable the
    refurbishment option will be disabled. Please use a flash prommer.
    • To be able to use the help files in Windows 7 you need to install Windows Help program
    (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
    - Start Phoenix with online connection to Internet, select “Help” and “Phoenix help”. Click the
    “Microsoft Help and Support” website link. Download WinHlp32 and install it.- Go to . Type “WinHlp32″ to “Search” – field. Locate
    Windows Help program (WinHlp32.exe) for Windows 7 and install it
    • When using flash prommers, only one connection type to one prommer is allowed. Please use either
    NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

    Supported operating systems and user rights
    • Windows XP Service Pack 1 or higher
    • When installing Phoenix into Win XP you must have local admin rights.
    • When using in Win XP, user must have power user rights.
    • Windows 7 32 Bit version[/CODE]untitled.jpg
    Secured URL
    Last edited by vishal_zala; 10th April 2011 at 09:02.

  2. Welcome

    To see more of this thread, please login or register.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Gelaatsverzorging | HDTV-1080p | حـب خادع ج1 حــ36-55 2018... | [X] CLOSE [X]